P5AT Engines

P5AT Engine

The 3.2 L Duratorq TDCi P5AT engine is beloved among ute enthusiasts throughout Australia. In fact, it is largely responsible for the success of the Mazda BT-50 and the PX Ford Ranger from 2011 to 2015. 

Jefferson Ford offers entire engine and transmission assemblies for models like the Ranger, Focus, and Mustang. Explore our website to find spare parts and accessories compatible with your vehicle. All you have to do is input your ride’s model, year, and variant to get an exhaustive list of suitable products. Shop now!

Taking good care of your engine and its various components is a surefire way to extend its service life. If you have a P5AT engine, there are a couple of parts that require your constant attention:

Intake Pipe

The intake pipe is known to crack without warning, so it's important to check it regularly. 

Allow the engine to stay idle for several minutes before inspecting the pipe. You should then run your hand along the length of the pipe to feel for air leaks. You can also listen for sucking noises from the pipe after you shut down the engine.

If you detect a leak, you should immediately replace the pipe with a more rugged silicone or metal alternative. You can also seal the leak with heat-resistant tape as a temporary fix.

Oil Pump

The variable pressure oil pump in the P5AT engine is not self-priming. If you allow the oil pump to drain for more than ten minutes, it may dry out and leave your engine without oil pressure.

You should keep that in mind every time you change your oil between service intervals. In addition, it's a good idea to run the engine hot and shut it off before draining the oil to ensure all contaminants are mixed with the old oil.

What are the benefits of using a P5AT engine?

The P5AT engine is renowned for its performance and reliability. It has proven its longevity over the years and continues to captivate gearheads all over the world. 

This five-cylinder engine provides tremendous power and torque improvements over its contemporaries. It was first introduced at the 2010 Australian International Motoring Show, and it has since become one of the most admired diesel motors in the world. What makes this engine so popular is its abundance of power and torque without sacrificing fuel efficiency. This configuration leads to smooth driving on city roads while having the necessary muscle to take on rough terrains. 

The P5AT engine is used in several widely recognised models like the Ranger, Transit, and Everest. If you want to make your ute perform as if it just got out of the factory, a genuine replacement assembly is the answer. Whether you have a rear-wheel drive or an all-wheel drive variant, a new engine can introduce significant enhancements to your driving experience. 

The P5AT engine has a cast-iron block and aluminium cylinder heads. It can deliver up to 197 HP at 3000 RPM and 350 lb-ft of torque at 2500 RPM. It can easily last hundreds of thousands of miles or a few decades if properly maintained.

Order a new engine assembly from our website and experience these benefits for yourself! 

Where can I buy a P5AT engine near me?

Jefferson Ford is one of the largest authorised suppliers of genuine spare parts in Australia. We are three-time champions of the prestigious Ford Parts Premiership Cup and the recipient of the 2018 Gold Master Dealer of the Year award. 

Check out our entire online collection to discover the perfect upgrades for your vehicle. We have an experienced team that can install a P5AT engine onsite or deliver it straight to your garage. We also have a broad range of specialised parts like power steering pumps, starter motors, and alternators for various models.

Jefferson Ford has a customer-oriented return policy so that you can shop with confidence and peace of mind. Provided that the returned item is in a resaleable condition and in its original box, we will accept it without question. In addition, this policy lasts an entire month, giving you ample time to decide whether the product is right for your vehicle. 

If you have questions about our products and services, call (03) 9300 5815 or email enquiries@jeffersonfordparts.com.au. You can also see our stock in person by visiting us at 58 Nepean Highway, Mentone VIC 3194. 

How long will it take to be delivered?

Jefferson Ford is committed to processing and shipping all orders within two business days. The completion of orders generally takes as little as three to seven business days. Moreover, the delivery status can be tracked online using a unique tracking number. 

It is crucial that you provide accurate information with regards to your delivery address at the checkout page. You cannot change these details once the order has been placed, so be extra cautious when entering your preferred address and contact number.

Most of the orders from our site are completed via Australia Post. That means they require your signature or an authorised person to accept the delivery. If the parts you order are large and bulky, you can select a different courier at the checkout page. Explore our online catalogue and place an order now!